Skip to content Skip to sidebar Skip to footer

Goaliath 60'' Ignite In-Ground Basketball Hoop Installation

Goaliath 60'' Ignite In-Ground Basketball Hoop

The Goaliath 60'' Ignite In-Ground Basketball Hoop is a popular choice for basketball enthusiasts who want to bring the game home. This high-quality basketball hoop promises to deliver years of fun and excitement for players of all ages. However, before you can start enjoying your new basketball hoop, you need to install it properly. Here's a step-by-step guide to help you get the job done right.

Step 1: Gather your tools and materials

Gathering Tools And Materials

Before you get started with the installation process, you need to gather all the necessary tools and materials to make the job easier. Here's what you'll need:

  • A ladder
  • A shovel
  • A level
  • A measuring tape
  • A rubber mallet
  • A power drill
  • A crescent wrench
  • Concrete mix
  • Water

Step 2: Choose a location

Choosing A Location

The next step is to choose the perfect location to install your new basketball hoop. You need to make sure the area is flat and level, and there is enough space for players to move around comfortably. Keep in mind that the Goaliath 60'' Ignite In-Ground Basketball Hoop requires a cement foundation to secure it in place. So, make sure you choose a location where you can dig a hole and pour concrete.

Step 3: Dig a hole

Digging A Hole

After you have chosen the location for your basketball hoop, it's time to dig a hole. The hole should be 48 inches deep and 18 inches in diameter. Use a shovel to dig the hole and make sure it's level.

Step 4: Mix the concrete

Mixing The Concrete

Once you have finished digging the hole, it's time to mix the concrete. Follow the instructions on the concrete mix bag to mix the concrete properly. You can use a wheelbarrow or a mixing tray to mix the concrete.

Step 5: Install the anchor kit

Installing The Anchor Kit

The next step is to install the anchor kit. The anchor kit is what secures the basketball hoop in place. Follow the instructions provided with the Goaliath 60'' Ignite In-Ground Basketball Hoop to install the anchor kit properly. Make sure the anchor kit is level and flush with the ground.

Step 6: Pour the concrete

Pouring The Concrete

After you have installed the anchor kit, it's time to pour the concrete. Pour the concrete into the hole until it's level with the ground. Use a level to make sure the concrete is level.

Step 7: Install the basketball hoop

Installing The Basketball Hoop

Once the concrete has dried, it's time to install the basketball hoop. Follow the instructions provided with the Goaliath 60'' Ignite In-Ground Basketball Hoop to install it properly. Use a rubber mallet to secure the pole in place. Use a crescent wrench to tighten the bolts and ensure everything is secure.

Step 8: Adjust the height

Adjusting The Height

The final step is to adjust the height of the basketball hoop. The Goaliath 60'' Ignite In-Ground Basketball Hoop can be adjusted from 7.5 feet to 10 feet. Use the crank handle provided with the basketball hoop to adjust the height to your desired level.

Following these simple steps can help you install the Goaliath 60'' Ignite In-Ground Basketball Hoop properly. Remember to take your time and follow the instructions closely to ensure everything is installed correctly. Once you have finished installing your basketball hoop, you can start enjoying hours of fun and excitement on the court.

Related video ofInstalling the Goaliath 60'' Ignite In-Ground Basketball Hoop