Goaliath 60 In Ground Basketball Hoop Installation Instructions
If you're looking for a top-of-the-line basketball hoop for your driveway or backyard, the Goaliath 60 In Ground Basketball Hoop is a great choice. This hoop is designed for serious players and features a tempered glass backboard, a heavy-duty steel frame, and an adjustable height mechanism. In this article, we'll provide step-by-step instructions for installing the Goaliath 60 In Ground Basketball Hoop.
Tools and Materials
Before you begin, you'll need to gather the following tools and materials:
- Post-hole digger
- Shovel
- Tape measure
- Level
- Concrete mix
- Wheelbarrow or mixing tub
- Bucket or hose for water
- Wrenches or pliers
Step 1: Choose the Installation Location
First, choose the location where you want to install your Goaliath 60 In Ground Basketball Hoop. Make sure the area is level and has enough space for the backboard and pole. You'll also want to make sure there are no overhead obstructions, like power lines or tree branches, that could interfere with the hoop.
Step 2: Dig the Hole
Using a post-hole digger, dig a hole that is approximately 24 inches wide and 48 inches deep. The hole should be wider at the bottom than at the top, to provide a stable base for the pole. Make sure the hole is centered and level.
Step 3: Mix the Concrete
Next, mix the concrete according to the manufacturer's instructions. You can mix the concrete in a wheelbarrow or mixing tub, using a shovel or hoe. Add water slowly, mixing the concrete until it has a thick, pourable consistency.
Step 4: Set the Pole
Place the pole in the center of the hole, making sure it is level. Have someone hold the pole steady while you pour the concrete into the hole, filling it to within a few inches of the top. Use a shovel or trowel to smooth the surface of the concrete.
Step 5: Let the Concrete Cure
Allow the concrete to cure for at least 72 hours before proceeding with the installation. Keep the area moist during this time, to prevent the concrete from drying out too quickly.
Step 6: Install the Backboard
Attach the backboard to the pole, using the hardware provided. Make sure the backboard is level and tight against the pole. You may need a second person to help hold the backboard in place while you tighten the bolts.
Step 7: Adjust the Height
Use the adjustable height mechanism to set the height of the hoop. The Goaliath 60 In Ground Basketball Hoop can be adjusted from 7.5 feet to 10 feet, allowing players of all ages and skill levels to enjoy the game.
Step 8: Test the Hoop
Before you start playing, test the hoop to make sure it is secure and stable. Give the backboard a gentle shake to make sure it is firmly attached to the pole. Check the bolts and hardware to make sure they are tight and secure. Finally, take a few practice shots to make sure the hoop is at the right height and angle.
Conclusion
Installing the Goaliath 60 In Ground Basketball Hoop is a big project, but with the right tools and some basic DIY skills, it's something that most homeowners can do themselves. Follow these step-by-step instructions to ensure a safe and successful installation.