Goaliath 50 Warrior In-Ground Basketball Hoop Installation Instructions
Are you looking for a high-quality basketball hoop for your home or school basketball court? The Goaliath 50 Warrior In-Ground Basketball Hoop is a great choice for you. This basketball hoop is designed for aggressive and competitive players who want to play basketball like a pro. In this article, we will provide you with step-by-step instructions on how to install the Goaliath 50 Warrior In-Ground Basketball Hoop.
Tools You Will Need
Before you start installing your Goaliath 50 Warrior In-Ground Basketball Hoop, you will need a few tools. Make sure you have the following tools ready:
- Shovel or post hole digger
- Tape measure
- Level
- Hammer or mallet
- Drill with 1/2-inch drill bit
- Torque wrench
- Adjustable wrench
- Rubber mallet
Installation Process
Now that you have all the tools ready, let's start installing your basketball hoop. Follow these simple steps:
Step 1: Choose the Location
Choose the location where you want to install your basketball hoop. Make sure that the ground is level and there are no obstacles like trees, poles or walls around.
Step 2: Dig the Hole
Once you have chosen the location for your basketball hoop, you need to dig a hole. The hole should be 18 inches in diameter and 48 inches deep. Use a shovel or post hole digger to dig the hole.
Step 3: Pour the Concrete
Pour concrete into the hole until it is about 4 inches from the top. Mix the concrete according to the instructions on the package. Make sure that the concrete is level with the ground.
Step 4: Insert the Post
Insert the post into the hole. Make sure that it is level and centered in the hole. Use a level to check the post. Tap the post with a hammer or mallet to make sure it is secure.
Step 5: Secure the Post
Using the torque wrench, secure the post anchor bolts to the post. Tighten each bolt in a criss-cross pattern until all bolts are tight.
Step 6: Attach the Backboard
Attach the backboard to the post using the hardware provided. Make sure that the backboard is level and centered on the post. Use a level to check the backboard.
Step 7: Install the Rim
Install the rim to the backboard using the hardware provided. Use an adjustable wrench to tighten the bolts. Make sure that the rim is level and centered on the backboard.
Step 8: Adjust the Height
Adjust the height of the basketball hoop to your desired level. The Goaliath 50 Warrior In-Ground Basketball Hoop can be adjusted from 7.5 feet to 10 feet in 6-inch increments. Use the crank mechanism to adjust the height.
Conclusion
Congratulations! You have successfully installed your Goaliath 50 Warrior In-Ground Basketball Hoop. Now, it's time to enjoy playing basketball like a pro. Remember to follow the installation instructions carefully and use the right tools for the job. Happy playing!
